Atex Ex N - ABB TZIDC Commissioning Instructions

Ex relevant specifications
7.2.2

ATEX Ex n

Designation:
Declaration of conformity:
Type:
Device class:
Standards:
Electrical data for II 3 G Ex nA IIC T6 or T4 Gc
Signal circuit
(terminal +11 / -12)
Mechanical digital feedback
(terminal limit1 +51 / -52 or
limit2 +41 / -42)
Plug-in module for shutdown contact input
(terminal +51 / -52 or +85 / -86)
Special conditions
• Devices may only be connected to circuits in zone 2 if they are suitable for operation in zone
2 potentially explosive atmospheres and for the conditions prevailing at the installation
location (manufacturer's declaration or certificate from an inspection authority).
• For the "digital feedback with proximity switches" circuit, external measures must be
implemented to prevent the rated voltage from being exceeded by more than 40 % in the
event of transient disturbances.
• It is only permissible to connect, disconnect, and switch live circuits during installation or
maintenance, or for the purpose of carrying out repairs. Comment: It is considered very
unlikely that a potentially explosive atmosphere would be present in zone 2 at the same time
that installation or maintenance/repair work was being carried out.
• Only non-flammable gases may be used for the pneumatic auxiliary power.
• Only use suitable cable entries which meet the requirements of IEC 60079-15.
• If the SJ2_S1N (NO) proximity switch is used, the positioner may only be operated at an
ambient temperature range from -25 ... 85 °C.
50
II 3 G
Temperature class
T4
T6
TZIDC, TZIDC-110, TZIDC-120
II 3 G Ex nA IIC T6 resp. T4 Gc
TÜV 02 ATEX 1943 X
"n" type of protection
II 3 G
EN 60079-15:2010
EN 60079-0:2009
Ta
Ambient temperature range
-40 ... 85 °C
-40 ... 50 °C
U = 9 to 32 V DC
I = 10.5 mA
U = 5 ... 11 V DC
U = 20 ... 30 V DC
CI/TZIDC/110/120-EN