ABB TZIDC-110 Operating Instruction
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Industrial Equipment
  5. TZIDC-110
  6. Operating instruction

ABB TZIDC-110 Operating Instruction

Digital positioner
Hide thumbs Also See for TZIDC-110:
Table of Contents

Advertisement

Quick Links

Download this manual
—
A B B M E A S U R E M E N T & A N A L Y T I C S | O P E R A T I N G I N S T R U C T I O N | O I / T Z I D C - 1 1 0 / T Z I D C - 1 2 0 - E N R E V . H
TZIDC-110, TZIDC-120
Digital Positioner
—
Introduction
TZIDC-110
TZIDC-120
The TZIDC-110, TZIDC-120 is an electronically
configurable positioner with communication
capabilities designed for mounting on pneumatic
linear or rotary actuators.
Fully automatic determination of the control
parameters and adaptation to the positioner
allow for considerable time savings as well as
optimum control behavior.
Digital Positioner for the
positioning of pneumatically
controlled final control elements.
Additional Information
Additional documentation on TZIDC-110, TZIDC-120
is available for download free of charge at
www.abb.com/positioners.
Alternatively simply scan this code:

Advertisement

Table of Contents
loading

Related Manuals for ABB TZIDC-110

Summary of Contents for ABB TZIDC-110

  • Page 1 — Introduction Additional Information TZIDC-110 TZIDC-120 The TZIDC-110, TZIDC-120 is an electronically Additional documentation on TZIDC-110, TZIDC-120 configurable positioner with communication is available for download free of charge at capabilities designed for mounting on pneumatic www.abb.com/positioners.

  • Page 2: Table Of Contents

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Table of contents Design and function ..........35 Safety ................4 Schematic diagram ............... 35 General information and instructions ........4 Principle of operation ............35 Warnings ..................4 Intended use ................4 Product identification ..........
  • Page 3 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Commissioning ............50 Commissioning..............50 Setting the bus address ........... 51 Request information ............. 51 Operating modes ..............51 Write protection and simulation mode ......52 Standard automatic adjustment ......... 52 Standard automatic adjustment for linear actuators* ..............

  • Page 4: Safety

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H 1 Safety General information and instructions Intended use Positioning of pneumatically controlled actuators; designed for These instructions are an important part of the product and mounting on linear and rotary actuators. must be retained for future reference.

  • Page 5: Cyber Security Disclaimer

    To find your local ABB contact visit: security breaches, unauthorized access, interference, intrusion, www.abb.com/contacts leakage and/or theft of data or information. ABB and its affiliates are not liable for damages and/or losses For more information visit: related to such security breaches, any unauthorized access, www.abb.com/measurement interference, intrusion, leakage and/or theft of data or information.

  • Page 6: Use In Potentially Explosive Atmospheres

    All electric equipment has to be suited for the respective intended use. Approvals and certifications The digital positioner TZIDC-110, TZIDC-120 has a variety of Figure 1: Ex marking (example, Atex / IECEx) different explosion protection approvals. The scope of these approvals extends over the entire EU, Switzerland, and special countries.

  • Page 7: Commissioning, Installation

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Commissioning, Installation Notes for operation The ABB positioner has to be mounted in a major system. • The positioner must be integrated in the local potential Depending on the degrees of IP-protection, an interval for equalization system.

  • Page 8: Maintenance, Repair

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 2 Use in potentially explosive atmospheres Maintenance, repair Definition of terms according to IEC 60079-17: • Maintenance and exchange work may be conducted by Maintenance qualified specialists only, i.e., qualified personnel in Defines a combination of actions performed to maintain or accordance with TRBS 1203 or similar.

  • Page 9: Preconditions For Safe Operation Of The Positioner

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Preconditions for safe operation of the positioner DANGER Cable gland Limited temperature range of the M20 × 1.5 plastic cable gland Risk of explosion due to hot parts for explosion protection variants: Hot parts inside the device pose an explosion hazard.

  • Page 10: Tzidc-110 - Ex Relevant Specification

    Local communication Only for connection to a programming device Ex marking interface (LCI) using an ABB LCI adapter (Um ≤ 30 V DC) outside Marking II 2 G Ex ia IIC T6, T4…T1 Gb the hazardous area. II 2 G Ex ib IIC T6, T4 ...T1 Gb Type examination TÜV 04 ATEX 2702 X...

  • Page 11: Atex / Ukex - 'Ex Ec' Type Of Protection

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H ATEX / UKEX – ‘Ex ec’ type of protection Ex-marking Special conditions In the case of TZIDC-110, TZIDC-120, the following shall apply for Ex marking safe use in the Ex ‘ec IIC’ type of protection: Marking II 3 G Ex ec IIC T6, T4 ...

  • Page 12: Iecex - 'Ex I' Type Of Protection

    – Exhaust gas must always be discharged outside. • The equipment may only be used as a II 2D type device Temperature data TZIDC-110 in areas where the level of mechanical danger is "low". Temperature class Ambient temperature Ta •...

  • Page 13: Iecex - 'Ex Na' And 'Ex Ec' Type Of Protection

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H IECEx – ‘Ex na’ and ‘Ex ec’ type of protection Special conditions Ex-marking In the case of TZIDC-110, TZIDC-120, the following shall apply for IECEx Ex ec safe use in the Ex ‘ec IIC’ type of protection: Marking Ex ec IIC T6 resp.

  • Page 14: Cfmus

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 2 Use in potentially explosive atmospheres … TZIDC-110 – Ex relevant specification cFMus Ex-marking TZIDC-110 TZIDC-110 Model number: V18346-1032b20c0d Model number: V18346-103Qb20c0d Model number: V18346-3032b20c0d Model number: V18346-303Qb20c0d Model number: V18346-5032b20c0d Model number: V18346-503Qb20c0d IS/ I, II, III / 1 /ABCDEFG / T6,T4 Ta = 40°C, 85°C –...
  • Page 15 Ex-free and a permit for hot works is in place. cleaning the equipment (dust settlement) has to be defined. • The TZIDC-110, TZIDC-120 is only to be operated in a fully Strict care has to be taken that only such equipment is installed mounted and intact enclosure.
  • Page 16 Only suitable cable entries which meet the requirements of IEC 60079-15 are allowed to be used. Use, operation The TZIDC-110, TZIDC-120 is only approved for intended and appropriate use. In case of non-compliance, the warranty and manufacturer’s liability do no longer apply! •...
  • Page 17 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Warning markings • Maintenance or replacement works are to be carried out by • ‘‘TO PREVENT IGNITION OF FLAMMABLE GASES OR VAPORS, qualified personnel only, i.e. personnel qualified according to DO NOT REMOVE COVER WHILE CIRCUITS ARE LIVE’’...

  • Page 18: Eac Tr-Cu-012 Ex I

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 2 Use in potentially explosive atmospheres … TZIDC-110 – Ex relevant specification EAC TR-CU-012 Ex i EAC TR-CU-012 Ex n Ex marking Ex marking Marking 1Ex ia IIC T6/Т4 Gb Х...
  • Page 19 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Special conditions • Devices must only be connected to circuits in zone 2 if they are suitable for operation in zone 2 potentially explosive atmospheres and for the conditions prevailing at the installation location (manufacturer's declaration or certificate from an inspection authority).

  • Page 20: Tzidc-120 - Ex Relevant Specification

    Local communication Only for connection to a programming device Ex marking interface (LCI) using an ABB LCI adapter (Um ≤ 30 V DC) outside Marking II 2 G Ex ia IIC T6, T4…T1 Gb the hazardous area. II 2 G Ex ib IIC T6, T4 ...T1 Gb Type examination TÜV 04 ATEX 2702 X...

  • Page 21: Atex / Ukex - 'Ex Ec' Type Of Protection

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H ATEX / UKEX – ‘Ex ec’ type of protection Special conditions Ex-marking In the case of TZIDC-110, TZIDC-120, the following shall apply for Ex marking safe use in the Ex ‘ec IIC’ type of protection: Marking II 3 G Ex ec IIC T6, T4 ...

  • Page 22: Iecex - 'Ex I' Type Of Protection

    (Pepperl & Fuchs Type 2 proximity switches SJ2-SN) (Limit1: +51 / −52), (Limit2: +41 / −42) Local communication Only for connection to a programming device interface (LCI) using an ABB LCI adapter (Um ≤ 30 V DC) outside the hazardous area.

  • Page 23: Iecex - 'Ex Na' And 'Ex Ec' Type Of Protection

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H IECEx – ‘Ex na’ and ‘Ex ec’ type of protection Ex-marking Special conditions In the case of TZIDC-110, TZIDC-120, the following shall apply for IECEx Ex ec safe use in the Ex ‘ec IIC’ type of protection: Marking Ex ec IIC T6 resp.

  • Page 24: Cfmus

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 2 Use in potentially explosive atmospheres … TZIDC-120 – Ex relevant specification cFMus Ex-marking TZIDC-120 TZIDC-120 Model number: V18347-1042b20c0d Model number: V18347-104Qb20c0d Model number: V18347-3042b20c0d Model number: V18347-304Qb20c0d Model number: V18347-5042b20c0d Model number: V18347-504Qb20c0d IS/ I, II, III / 1 /ABCDEFG / T6,T4 Ta = 40°C, 85°C –...
  • Page 25 Ex-free and a permit for hot works is in place. Strict care has to be taken that only such equipment is installed • The TZIDC-110, TZIDC-120 is only to be operated in a fully that complies with the types of protection relevant to the mounted and intact enclosure.
  • Page 26 Only suitable cable entries which meet the requirements of IEC 60079-15 are allowed to be used. Use, operation The TZIDC-110, TZIDC-120 is only approved for intended and appropriate use. In case of non-compliance, the warranty and manufacturer’s liability do no longer apply! •...
  • Page 27 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Warning markings • Maintenance or replacement works are to be carried out by • ‘‘TO PREVENT IGNITION OF FLAMMABLE GASES OR VAPORS, qualified personnel only, i.e. personnel qualified according to DO NOT REMOVE COVER WHILE CIRCUITS ARE LIVE’’...

  • Page 28: Eac Tr-Cu-012 Ex I

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 2 Use in potentially explosive atmospheres … TZIDC-120 – Ex relevant specification EAC TR-CU-012 Ex i EAC TR-CU-012 Ex n Ex marking Ex marking Marking 1Ex ia IIC T6/Т4 Gb Х...
  • Page 29 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Special conditions • Only devices that are suited for operation in hazardous areas of Zone 2 and the conditions prevailing at the place of use may be connected to circuits in Zone 2 (manufacturer's declaration or certificate from a test center).

  • Page 30: Fm Installation Drawing No. 901265

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 2 Use in potentially explosive atmospheres FM installation drawing No. 901265 Page 1 of 5...
  • Page 31 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Page 2 of 5...
  • Page 32 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 2 Use in potentially explosive atmospheres … FM installation drawing No. 901265 Page 3 of 5...
  • Page 33 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Page 4 of 5...
  • Page 34 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 2 Use in potentially explosive atmospheres … FM installation drawing No. 901265 Page 5 of 5...

  • Page 35: Design And Function

    Principle of operation The TZIDC-110, TZIDC-120 is an electronically configurable positioner with communication capabilities designed for mounting on pneumatic linear or rotary actuators. Fully automatic determination of the control parameters and adaptation to the positioner allow for considerable time savings as well...

  • Page 36: Product Identification

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H 4 Product identification Name plate 1 Serial number o UKCA marks 2 Order code p Notice: Observe product documentation 3 Hardware rev. / software rev. q IP rating 4 Year of manufacture / calendar week...

  • Page 37: Transport And Storage

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H 5 Transport and storage 6 Installation Safety instructions Inspection Check the devices immediately after unpacking for possible CAUTION damage that may have occurred from improper transport. Risk of injury Details of any damage that has occurred in transit must be Risk of injury from pressurized positioner / actuator.

  • Page 38: Mechanical Mounting

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 6 Installation Mechanical mounting General Operating range for linear actuators: The operating range for linear actuators is maximum ±45° symmetrically to the longitudinal axis. The usable span within the operating range is ideally 40°, but at least 25°.

  • Page 39: Mounting On Linear Actuators

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Mounting on linear actuators For mounting on a linear actuator in accordance with IEC 60534 (lateral mounting as per NAMUR), the following attachment kit is available: Figure 10: Mounting lever and bracket on the positioner 1.
  • Page 40 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 6 Installation … Mechanical mounting Mounting on a cast iron yoke Note Adjust the height of the positioner on the cast iron yoke or columnar yoke until the lever is horizontal (based on a visual check) at half stroke of the valve.

  • Page 41: Mounting On Rotary Actuator

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Mounting on rotary actuator Position of actuator bolt For mounting on part-turn actuators in accordance with The actuator bolt for moving the potentiometer lever can be VDI / VDE 3845, the following attachment kit is available: mounted permanently on the lever itself or on the valve stem.
  • Page 42 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 6 Installation … Mechanical mounting 1 Attachment bracket Figure 18: Screwing the attachment bracket onto the positioner Figure 17: Mounting the adapter on the positioner 1. Determine the mounting position (parallel to actuator or at 90° angle) 2.

  • Page 43: Electrical Connections

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H 7 Electrical connections Safety instructions WARNING Risk of injury due to live parts! When the housing is open, contact protection is not provided and EMC protection is limited. • Before opening the housing, switch off the power supply.

  • Page 44: Tzidc-110, Tzidc-120 Terminal Assignment

    Figure 20: Electrical connection TZIDC-110, TZIDC-120 Connections for inputs and outputs Note Terminal Function/comments The TZIDC-110, TZIDC-120 can be equipped either with feedback +11 / −12 Fieldbus, bus feed on the actuator position using proximity switches or using +51 / −52 Limit 1 –...

  • Page 45: Electrical Data For Inputs And Outputs

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Electrical data for inputs and outputs Note When using the device in potentially explosive atmospheres, note the additional connection data in Use in potentially explosive atmospheres on page 6! Fieldbus input Bus Connection PROFIBUS PA®...

  • Page 46: Connection On The Device

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 7 Electrical connections Connection on the device M11555 1 Cable gland 3 Terminals for feedback on the actuator position using proximity switches or microswitches 2 Blind plug 4 Terminals for basic unit Figure 21: Connection on device (example) 2 tap holes ½- 14 NPT or M20 ×...

  • Page 47: Conductor Cross-Section

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Conductor cross-section Basic device Option modules Electrical connections Cross section 4 to 20 mA input Screw terminals max. 2.5 mm (AWG14) Rigid / flexible wires 0.14 to 1.5 mm (AWG26 to AWG17) Options Screw terminals max.

  • Page 48: Pneumatic Connections

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H 8 Pneumatic Connections Safety instructions Information on double acting actuators with spring- CAUTION return mechanism Risk of injury On double-acting actuators with spring-return mechanism, a Risk of injury from pressurized positioner / actuator.

  • Page 49: Connection On The Device

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Connection on the device Air supply Instrument air* Purity Maximum particle size: 5 μm Maximum particle density: 5 mg/m Oil content Maximum concentration 1 mg/m Pressure dew point 10 K below operating temperature...

  • Page 50: Commissioning

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H 9 Commissioning CAUTION Commissioning Risk of injury due to incorrect parameter values! Commissioning the positioner: Incorrect parameter values can cause the valve to move 1. Open the pneumatic power supply. unexpectedly. This can lead to process failures and result in 2.

  • Page 51: Setting The Bus Address

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Request information When the device is in BUS operation, the information shown Setting the bus address below can be called up. 1. Switching to the configuration level: Press the following control buttons to access this information: •...

  • Page 52: Write Protection And Simulation Mode

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 9 Commissioning Write protection and simulation mode Standard automatic adjustment Note There are two jumpers on the mainboard that can be used to Standard Auto Adjust does not always result in optimum control activate or block simulation mode and write access.

  • Page 53: Sample Parameters

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Sample parameters ‘Change the zero position of the LCD display from clockwise (CLOCKW) to counter-clockwise limit stop (CTCLOCKW)’ Initial situation: the positioner is in bus operation on the 4. Changing parameter settings: operating level.

  • Page 54: Setup Of The Feedback On The Actuator Position Using Proximity Switches

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 9 Commissioning … Sample parameters Setup of the feedback on the actuator position using Setup of the feedback on the actuator position using proximity switches microswitches 1. Loosen the screws for the housing cover and remove it.

  • Page 55: Operation

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H 10 Operation Safety instructions Description of symbols CAUTION Risk of injury due to incorrect parameter values! Symbol Description Incorrect parameter values can cause the valve to move Operation or access is restricted.

  • Page 56: Menu Levels

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 10 Operation Menu levels The positioner has two operating levels. Operating level On the operating level the positioner operates in one of four possible operating modes (two for automatic control and two for manual mode).

  • Page 57: Parameter Overview

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Parameter overview M 0502 Figure 25: Parameter overview TZIDC-1x0, -2x0...

  • Page 58: Parameter Descriptions

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 10 Operation … Parameter overview Parameter descriptions Para- Display Function Possible parameter setting Unit Factory setting meter P1._ STANDARD P1.0 ACTUATOR Actuator type Actuator type LINEAR, ROTARY LINEAR P1.1 AUTO_ADJ Automatic adjustment...
  • Page 59 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Para- Display Function Possible parameter setting Unit Factory setting meter P7.5 GOPULS DOWN Go pulse, down 0 to 200 msec P7.6 Y-OFS UP Y offset, up Y offset (up) Y-Min to 100.0 40.0...

  • Page 60: Diagnosis / Error Messages

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H 11 Diagnosis / error messages Error codes Error code Possible cause Impact Troubleshooting the Instrument Defective memory chip Device does not boot up. Return the device for repair. Automatic adjustment function lasts too long.

  • Page 61: Alarm Codes

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Alarm codes Alarm code Possible cause Impact Troubleshooting the Instrument Leakage between positioner and actuator Depending on how well the leakage can be Check the piping. compensated, small control actions are required at regular intervals.

  • Page 62: Message Codes

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H … 11 Diagnosis / error messages Message codes Message codes Message description Action stopped by operator. Error during plausibility check. Action completed, acknowledgment required. Memory error, data could not be saved. Safe position is active, action cannot be executed.

  • Page 63: Maintenance

    All devices delivered to ABB must be free from any hazardous materials (acids, alkalis, solvents, etc.). Please contact Customer Center Service acc. to page 5 for...

  • Page 64: Appendix

    TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H 16 Appendix Return form Statement on the contamination of devices and components Repair and/or maintenance work will only be performed on devices and components if a statement form has been completed and submitted.
  • Page 65 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Trademarks FOUNDATION Fieldbus is a registered trademark of FieldComm Group, Austin, Texas, USA. PROFIBUS and PROFIBUS PA are registered trademarks of PROFIBUS & PROFINET International (PI)
  • Page 66 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Notes...
  • Page 67 TZIDC-110, TZIDC-120 DIGITAL POSITIONER | OI/TZIDC-110/TZIDC-120-EN REV. H Notes...
  • Page 68 We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB. © ABB 2023...

This manual is also suitable for:

Tzidc-120

Table of Contents