Configuring The Bargraph Display - ABB SM1000 User Manual

4.5.3 Configuring the Bargraph Display

Alarm Trip Level
(not shown for slow and
fast rate alarms)
Maximum Value
(solid color)
Instantaneous Value
Minimum Value
(white fill)
Bar
Recording Chart Process
Bar graph view enable
Bar graph markers
Menu enables
Bar graph menu enables
1. Message select enable
2. Alarm acknowledge enable
3. Max/min reset enable
Group 1
Level Pressure
2.08 4
metres bar
5.0 5.0
2.5 2.5
0.0 0.0
Analog Channels
Digital Archive
Horizontal
Max, min and alarm trips
1 2 3
In Flow Out Flow Temp
204.9 198.9 195
l/hr l/hr °C
300 300 250
150 150 125
0 0.0 0
Identical Maximum
and Minimum
Values
Minimum below
engineering limit,
maximum above
engineering limit
Select the Bargraph views to be displayed in the current
Process Group.
Select the markers (channel-colored max./min. indicators
and alarm trip points) to be displayed on the bargraph.
Select the menu items to be accessible from the Bargraph
views.
Message select enable
Enables the Operator to activate one of 24 pre-configured
messages ore a user-defined message.
Alarm acknowledge enable
Enables the Operator to acknowledge any alarms
associated with the current group.
Max/min reset enable
Enables the operator to reset the maximum and minimum
values of one or more channels to the current value.
Note. Menu items that are not enabled are greyed-out in the
Bargraph menu.
4 CONFIGURATION...
28/03/00
14:52:00
Alarm 1
On
Engineering High Value
Engineering Middle Value
Engineering Low Value
Digital
Channel
53