Auto-Negotiation Expansion : Register 6 - Samsung KS8910 User Manual

100/10 mbps ethernet transceriver
Table of Contents

Advertisement

Preliminary Spec. ver
1.4
KS8910 100/10 Mbps ETHERNET TRANSCEIVER

AUTO-NEGOTIATION EXPANSION : REGISTER 6

[ANER] 06h
15
0
0
0
0
0
LP_AN_Able
Page_RX
NP_Able
LP_NP_Able
PDF
0
0
0
0
0
Link Partner AN Able
Link Code word Page
Received
Next Page Able
Link Partner Next Page
Able
Parallel Detection Fault
5
4
3
0
PDF
LP_NP_Able
1 = The Link Partner supports the Auto-Negotiation.
0 = The Link Partner does not support the Auto-Negotiation.
1 = A new Link Code Word has been received. This bit is cleared
automatically when Auto-Negotiation Expansion is read or when a next
page is written to Auto-Negotiation Next Page Transmit register.
0 = New Link Code Word has not been received.
This status bit indicates if this XCVR supports Next Page negotiation.
This XCVR is capable of supporting the Next Page negotiation.
1 = This XCVR is Next Page Able. (Permanently Set)
0 = This XCVR is not Next Page Able.
This status bit indicates if the Link Partner supports Next Page
negotiation.
1 = Link Partner is Next Page Able.
0 = Link Partner is not Next Page Able.
1 = Parallel Detection Fault. During the Parallel detection, Zero or More
than One PMAs indicate that their links are READY.
0 = No Parallel Detection Fault. This PDF bit will be reset to 0 upon a
read of the ANER register.
2
1
NP_Able
Page_RX
REGISTERS
06h
0
LP_AN_Able
7-9

Advertisement

Table of Contents
loading

Table of Contents