Table of Contents
Advertisement
Preliminary Spec. ver
1.4
KS8910 100/10 Mbps ETHERNET TRANSCEIVER
2
EXTERNAL SIGNALS
OVERVIEW
Figure 2-1 shows the 44 external signals for the 10/100 Mbit/s Ethernet Physical Layer Transceiver, divided into
functional groups. Power and ground pins need to be added to this signal list. The device will require a 64 pin
package. This chapter groups the signal definitions by functional area, giving each signal' s symbolic name, full
name, type, and a brief definition. The groups are:
•
pins for MII Transmit
•
pins for MII Receive
•
pins for MII Station Management
•
pins for Twisted-Pair Interface
•
pins for Analog Pins
•
pins for LED Indicators
•
pins for Control Signals
EXTERNAL SIGNALS
2-1
Advertisement
Table of Contents
