ABB ACH550-01 User Manual page 257

Code Description
3106 AR UNDERVOLTAGE
Sets the automatic reset for the undervoltage function on or off.
0 = – Disables automatic reset.
DISABLE
1 = – Enables automatic reset.
ENABLE
• Automatically resets the fault (
3103
DELAY TIME
3107 AR AI<MIN
Sets the automatic reset for the analogue input less than the minimum
value function on or off.
0 = – Disables automatic reset.
DISABLE
1 = – Enables automatic reset.
ENABLE
• Automatically resets the fault (
DELAY TIME
WARNING! When the analogue input signal is restored, the drive
may restart, even after a long stop. Make sure that automatic, long
delayed starts will not cause physical injury and/or damage
equipment.
3108 AR EXTERNAL FLT
Sets the automatic reset for external faults function on or off.
0 = – Disables automatic reset.
DISABLE
1 = – Enables automatic reset.
ENABLE
• Automatically resets the fault (
delay set by 3103
operation.
252
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DC UNDERVOLT
, and the drive resumes normal operation.
AI
, and the drive resumes normal operation.
EXT FAULT
, and the drive resumes normal
DELAY TIME
Parameter listing and descriptions
ACH550-01 User's Manual
Range
0=DISABLE, 1=ENABLE
) after the delay set by
0=DISABLE, 1=ENABLE
< ) after the delay set by 3103
MIN
0=DISABLE, 1=ENABLE
1 or
EXT FAULT
2) after the