Installing The Ifs06 On The Esd Floor; Figure 8-9 Tightening The Bolts; Figure 8-10 Support For Installing The Esd Floor - Huawei DBS3900 Installation Manual

8 Installing the IFS06
----End

8.2 Installing the IFS06 on the ESD Floor

This section describes the procedure for installing the IFS06 on the ESD floor.
Context
Figure 8-10
adjustable height (I) and support with fixed height (II). The installation process of two supports
is the same, and the following descriptions are based on the support with adjustable height (I).

Figure 8-10 Support for installing the ESD floor

(1) Mounting holes for the ESD floor
The height of an ESD floor refers to the spacing between the concrete floor and the upper surface
of the ESD floor.
8-6

Figure 8-9 Tightening the bolts

shows the support for installing the ESD floor, which is classified into support with
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Support (3) Mounting hole for the concrete floor
DBS3900(ICR)
Installation Guide
Issue 01 (2011-03-30)