Optional) Installing The Power Equipment (Ac/Dc); Figure 13-9 Installing The Pgnd Cable For The Power Equipment (Dc/Dc) - Huawei DBS3900 Installation Manual

13 Installing Devices in the IMB03

Figure 13-9 Installing the PGND cable for the power equipment (DC/DC)

(1) OT terminal (M6)
----End

13.4 (Optional) Installing the Power Equipment (AC/DC)

This section describes the procedure for installing the power equipment (AC/DC) in the IMB03.
Context
The installation of the power equipment (AC/DC) is required in the 220 V AC power supply
scenario.
Procedure
Step 1 Install the power equipment (AC/DC) into the corresponding slot in the lower-level IMB03, and
then tighten the four M6x16 bolts on the panel, as shown in
13-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) OT terminal (M4)
Figure 13-10.
DBS3900(ICR)
Installation Guide
Issue 01 (2011-03-30)