DBS3900(ICR)
Installation Guide
Table 15-19 Cable description
15.2.14 Cable Connections (-48 V DC, Six RRU3804s+Six RRU3201s)
This section describes all the cable connections in a base station configured with six RRU3804s
and six RRU3201s in the -48 V DC power supply scenario.
Figure 15-20
Issue 01 (2011-03-30)
Power cable
Jumper
NOTE
The E1/T1 cable or FE/GE cable is used according to the on-site requirements. Only an optical cable or
Ethernet cable can be connected to a GE port on the LMPT.
shows the cable connections.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
CPRI cable
PGND cable
15 Installing Cables
GPS clock
signal cable
E1/T1 cable
or FE/GE
cable
15-41