15 Installing Cables
l
15-66
Figure 15-40 Connections of the antenna jumper for the DC RRU
3.
Route cables by referring to
4.
Use cable ties to bind cables.
5.
Label the installed cables by referring to Attaching a Sign Plate Label.
Installing the antenna jumper for the AC RRU
1.
Connect one end of the antenna jumper to the ANTA and ANTB ports at the bottom
of the RRU.
2.
Connect the other end to the feeder or antenna, as shown in
TIP
Pre-bend the feeder before tightening the feeder connector.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15.1 Cabling
Requirements.
DBS3900(ICR)
Installation Guide
Figure
15-41.
Issue 01 (2011-03-30)