15 Installing Cables
Table 15-9 Cable description
15.2.8 Cable Connections (-48 V DC, Three RRU3008s+Three
RRU3201s)
This section describes all the cable connections in a base station configured with three RRU3008s
and three RRU3201s in the -48 V DC power supply scenario.
Figure 15-10
15-22
Power cable
Jumper
NOTE
The E1/T1 cable or FE/GE cable is used according to on-site requirements. Only an optical cable or Ethernet
cable can be connected to a GE port on the LMPT.
shows the cable connections.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
CPRI optical
cable
PGND cable
DBS3900(ICR)
Installation Guide
GPS clock
signal cable
E1/T1 cable
or FE/GE
cable
Issue 01 (2011-03-30)