15 Installing Cables
----End
15.12 Installing the Antenna Jumper for the RRU
This section describes the procedure for installing the antenna jumper for the DC RRU.
15-64
Figure 15-39 Connections of the CPRI optical cable for AC RRUs
(1) CPRI optical cable
4.
Connect the other end to the CPRI port on the BBU.
5.
Route cables by referring to
6.
Use cable ties to bind cables.
7.
Label the installed cables by referring to Attaching an L-Shaped Label.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15.1 Cabling
Requirements.
DBS3900(ICR)
Installation Guide
Issue 01 (2011-03-30)