Assembling The Ifs06; Figure 7-1 Installing The Rear Feet - Huawei DBS3900 Installation Manual

DBS3900(ICR)
Installation Guide
This chapter describes the procedure for assembling the IFS06.
Procedure
Step 1 Use four M12x30 bolt assemblies to secure the rear feet to the main frame, as shown in
7-1.
Place the foam pad or cardboard under the IFS06 to prevent any damage to the paint.

Figure 7-1 Installing the rear feet

Step 2 Rotate the IFS06 by 180°, and then use six M12x30 bolt assemblies to secure the front feet to
the main frame, as shown in
Issue 01 (2011-03-30)
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7

Assembling the IFS06

Figure 7-2.
7 Assembling the IFS06
Figure
7-1