Connecting To Z-Tio, Z-Dio, Z-Ct - Mitsubishi Electric GOT2000 Series Connection Manual

9.5.3

Connecting to Z-TIO, Z-DIO, Z-CT

■1. Communication settings
Make the communication settings of the temperature controller.
Item
Communication speed
Communication protocol
Data bit configuration
*2
Unit address
Interval time
*1
*2
■2. Setting DIP switches
Make the settings of transmission speed, data bit configuration, communication protocol
Setting item
Communication speed
Data bit configuration
Communication protocol
9 - 48
9.5 Temperature Controller Side Setting
*1
9600bps, 19200bps, 38400bps
MODBUS
Data bit : 8bits, Parity : None
Data bit : 8bits, Parity : Even
Data bit : 8bits, Parity : Odd
Stop bit : 1bit (fixed)
0 to F
0 to 250ms
Adjust the settings with GOT settings.
Select the module address without overlapping with that of other units.
Front side
Set value
9600bps
19200bps
38400bps
Data bit: 8bits,
Parity: None
Data bit: 8bits,
Parity: Even
Data bit: 8bits,
Parity: Odd
MODBUS
Setting range
Dip switch
OFF
Right side
1 2
ON OFF
OFF ON
ON ON
ON
Switch position
3 4 5
OFF OFF ON
OFF ON ON
ON ON ON
6
ON