Mitsubishi Electric GOT2000 Series Connection Manual page 374

■4. Ethernet setting
(1) Ethernet connection type: EtherNet/IP (AB)
This section describes the Ethernet setting for the communication driver AB Control/CompactLogix.
Item
Host
Net No.
*1
Station
Unit Type
IP address
Port No.
Communication format
Slot No.
*1
10 - 22
10.3 Ethernet Connection
The host is displayed.(The host is indicated with an asterisk (*).)
Set the network No. of the connected Ethernet module.
(Default: blank)
Set the station No. of the connected Ethernet module.
(Default: blank)
AB(EtherNet/IP) (fixed)
Set the IP address of the connected Ethernet module.
(Default: blank)
44818 (fixed)
TCP (fixed)
Set the slot No. connected to the CPU module in the PLC module.
(Default: blank)
Each of [GOT Station] set in the communication detail setting and [Station] set in the Ethernet setting must be set to different
station numbers.
➠
■2. Communication detail settings
Description Set value
―
1 to 239
1 to 64
AB(EtherNet/IP) (fixed)
PLC side IP address
44818 (fixed)
TCP (fixed)
0 to 16