Connecting To Ethernet Interface Module (F3Le12-0T) - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

Connecting to Ethernet Interface Module (F3LE12-0T)

■1. Switch settings of Ethernet Interface Module

Set the switches accordingly.

(1) IP address switch

Set the IP address with eight Hex rotary switches on the side of the base unit.

(2) Condition setting switch

Set the data format, write protection, or operation mode with the DIP switch on the side of the base unit.

7.3 Ethernet Connection

Switch setting

Set the switches before mounting the Ethernet Interface Module on the base unit.

Condition setting switch

IP address switch

Write protect

Operation mode

Right side view with the cover

1 2 3 4 5 6 7 8

OFF (not protect)

ON (not available),

OFF (always)

OFF (normal operation)

Table of Contents