Mitsubishi Electric GOT2000 Series Connection Manual page 376

10 - 24
10.3 Ethernet Connection
POINT POINT POINT
Ethernet setting for the multiple CPU system configuration
When Ethernet connection type is EtherNet/IP (AB Tag), even if the device has the same IP
address in the Ethernet setting, the GOT can monitor in the multiple CPU system configuration
by setting different slot Nos.
See the Ethernet setting in the following system configuration.
(Example of system configuration)
Slot 0 1
Slot No.0 CPU
IP address: 1.1.1.1
Slot No.1 CPU
IP address: 1.1.1.1
(Example of Ethernet setting)
In the above mentioned Ethernet setting, the GOT monitors the CPU as follows.
• When [Net No.]: 1 and [Station No.]: 1 are set for an object, the GOT monitors the CPU whose
slot No. is 0.
• When [Net No.]: 1 and [Station No.]: 2 are set for an object, the GOT monitors the CPU whose
slot No. is 1.
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be changed on the Utility's [Communication setting]
after writing [Communication Settings] of project data.
For details on the Utility, refer to the following manual.
➠
GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
(3) Setting IP address and port No
The same IP address cannot be set for the same port No.The same IP address can be set for
the different port No.
GOT
Net No.: 1
IIP address: 1.1.1.2
HUB