(3) Connecting terminating resistors
(a)
GOT side
• For GT27, GT25(Except GT2505-V), GT23
Set the terminating resistor setting switch of the GOT main unit to "Enable".
• For GT2505-V, GT21, GS
Set the terminating resistor selector to "330Ω".
For the procedure to set the terminating resistor, refer For the procedure to set the terminating resistor, refer to
the following.
➠
1.4.3Terminating resistors of GOT
(b)
FUJI PLC side
When connecting a FUJI PLC to the GOT, a terminating resistor must be connected.
➠
4.2.7 PLC Side Setting
4.2 Serial connection
4
4 - 17