ABB AC 31 Technical Manual page 138

ABB Control - AC 31
1SBC 260400 R1001-b 06.99
Programming
Standard display format
G
The channel type can also be set with the pushbutton.
The configuration mode is set when the push button is pressed for 10 seconds.
The display starts to blink and the current format is displayed (the factory setting is -/+10V)
10V
0-20
4-20
100
1000
1.0.0.
1.0.0.0.
Voltage configuration
The minimum displayed value is 0.01V
0-20 mA configuration
The minimum displayed value is 0.01mA
4-20 mA configuration
The minimum displayed value is 0.01mA
Pt100 configuration
The minimum displayed value is 0.1°C
Pt1000 configuration
The minimum displayed value is 0.1°C
Pt100 3 wires configuration
The minimum displayed value is 0.1°C
Pt1000 3 wires configuration
The minimum displayed value is 0.1°C
Page 5-29