ABB AC 31 Technical Manual page 137

Page 5-28
Programming
G Push button description
The push button is used to choose the channel to display the value.
The value is always displayed according to the selected format.
Channel numbers are scrolled every time the push button is pressed.
The 2 analog outputs have the number 4 and 5
The display is tested (all segments ON) after each revolution without 50 or 60 hz filtering.
The filtering type can be selected when the push button is pressed for 5 seconds when the
segments test
This choice of 50 or 60 hz is selected for all channels of module. When you chose a filtering
configuration you increase the acquisition time (5 seconds) of all channels.
60 H
50 H
When the choice is selected , release the push button for 5 seconds and the new filtering is
store in the EEPROM
ABB Control - AC 31
1SBC 260400 R1001-b 06.99