Installation Flow Chart - ABB ACS550-01 User Manual

ACS550 User's Manual
Installation
Study these installation instructions carefully before proceeding. Failure to observe
the warnings and instructions may cause a malfunction or personal hazard.
Warning! Before you begin read "Safety" on page 3.

Installation Flow Chart

The installation of the ACS550 adjustable speed AC drive follows the outline below.
The steps must be carried out in the order shown. At the right of each step are
references to the detailed information needed for the correct installation of the unit.
PREPARE for installation
PREPARE the Mounting Location
REMOVE the front cover
MOUNT the drive
INSTALL wiring
CHECK installation
RE-INSTALL the cover
APPLY power
START-UP
Task
"Preparing for Installation" on page 8.
"Prepare the Mounting Location" on page 11.
"Remove Front Cover" on page 11.
"Mount the Drive" on page 12.
"Wiring Overview" on page 13 and
"Install the Wiring" on page 18.
"Check Installation" on page 23.
"Re-install Cover" on page 24.
"Apply Power" on page 25.
"Start-Up" on page 25.
See
Installation
7