Abb Control Profiles Technical Data; Dcu Profile; Control Word - ABB ACS550-01 User Manual

168

ABB Control Profiles Technical Data

Overview
ABB Drives Profile
The ABB Drives profile provides a standard profile that can be used on multiple
protocols, including Modbus and the protocols available on the FBA module. Two
implementations of the ABB Drives profile are available:
•
ABB DRV FULL
ACS600 and ACS800 drives.
•
ABB DRV LIM
ACS400 drives. This implementation does not support two control word bits
supported by
Except as noted, the following "ABB Drives Profile" descriptions apply to both
implementations.

DCU Profile

The DCU profile extends the control and status interface to 32 bits, and is the
internal interface between the main drive application and the embedded fieldbus
environment.

Control Word

The
CONTROL WORD
system. The fieldbus master station sends the
switches between states according to the bit-coded instructions in the
WORD
• The drive is in remote (
• The serial communication channel is defined as the source for controlling
commands (set using parameters such as 1001
COMMANDS
• The serial communication channel used is configured to use an ABB control
profile. For example, to use the control profile
parameter 9802
PROFILE
Embedded Fieldbus
– This implementation standardizes the control interface with
– This implementation standardizes the control interface with
ABB DRV FULL
is the principal means for controlling the drive from a fieldbus
. Using the
CONTROL WORD
REM
and 1102
EXT
COMM PROT SEL
= 2 (
ABB DRV FULL
.
CONTROL WORD
requires that:
) control.
1/ 2 ).
EXT SEL
ABB DRV FULL
= 1 (
STD MODBUS
).
ACS550 User's Manual
to the drive. The drive
CONTROL
1 , 1002
EXT COMMANDS
, requires both
), and parameter 5305
2
EXT
EFB CTRL