Setup Mail Rx; Setup Mail Tx - Dell E515dw User Manual

used by the Dell machine (for example, "mailhost.dellmail.net" or "192.0.0.1"). This address is necessary for the
I-Fax features to function correctly.
Port
This field displays the POP3 port number or the IMAP4 port number (for incoming emails) used by the Dell
machine.
Mailbox Name
Specify a mailbox name on the POP3 server or the IMAP4 server where the Internet print jobs will be retrieved.
Mailbox Password
Specify the password for the POP3 server account or the IMAP4 server account where the Internet print jobs will be
retrieved.
NOTE: To setup the Mailbox so that you are not asked for a password, enter a single space .
Select Folder (for IMAP4)
Specify the mail folder name where the Internet print jobs will be retrieved.
NOTE: To setup a specific folder, type the folder name in the Specified field .
• You must enter the full path of the mail folder.
• Use single byte characters only.
• Enter "Inbox" for the root mail folder.
APOP (for POP3)
Enable or disable the Authenticated Post Office Protocol (APOP).

Setup Mail RX

Related Models:Dell E515dn / Dell E515dw
Auto Polling
When set to On, the machine automatically checks the POP3/IMAP4 server for new messages.
Poll Frequency
Sets the interval for checking for new messages on the POP3/IMAP4 server (the default interval is 10 minutes).
Header
Allows the contents of the mail header to be printed when the received message is printed.
Del/Read Error Mail
When set to On, the machine automatically deletes error mails that the machine cannot receive from the mail
server.
Notification
Allows a "confirmation of receipt" message to be transmitted to the sending station when the I-Fax has been
received. This feature works only on I-Fax machines that support the Message Disposition Notification (MDN)
specification.

Setup Mail TX

Related Models:Dell E515dn / Dell E515dw
Sender Subject
This field displays the subject attached to the I-Fax data being sent from the Dell machine to a computer.
Size Limit
Network 243