Send An Email With User Authentication - Dell E515dw User Manual

screen .
3. No password is required by default. Type a password if you have set one, and then click
4. Click the Network tab.
5. Click Protocol in the left navigation bar.
6. In the POP3/IMAP4/SMTP field, click Advanced Setting and make sure the status of POP3/IMAP4/SMTP is
Enabled.
7. Configure the POP3/IMAP4/SMTP settings.
• For more information, see the Help text in Web Based Management.
• Confirm that the email settings are correct after configuration by sending a test email.
• If you do not know the POP3/IMAP4/SMTP server settings, contact your network administrator or Internet
Service Provider (ISP).
8. When finished, click Submit.
The Test Send/Receive E-mail Configuration dialog box appears.
9. Follow the instructions in the dialog box to test the current settings.

Send an Email with User Authentication

Related Models:Dell E515dn / Dell E515dw
Your Dell machine supports the SMTP-AUTH method to send email via an email server that requires user
authentication. This method prevents unauthorized users from accessing the email server.
You can use SMTP-AUTH for email notification, email reports and I-Fax.
NOTE: We recommend using Web Based Management to configure the SMTP authentication .
Email Server Settings
You must configure your machine's SMTP authentication method to match the method used by your email server.
For details about your email server settings, contact your network administrator or Internet Service Provider (ISP).
NOTE: To enable SMTP server authentication: in the Web Based Management POP3/IMAP4/SMTP screen, under
Server Authentication Method, you must select SMTP-AUTH .
.
Security 253