Dell E515dw User Manual page 209

Infrastructure
For example:
Network Name (SSID)
HELLO
Communication Mode
Infrastructure
NOTE: If your router uses WEP encryption, enter the key used as the first WEP key . Your Dell machine supports
the use of the first WEP key only .
2. Press Menu.
3. Press p or q to select the Network option, and then press OK.
4. Press p or q to select the WLAN option, and then press OK.
5. Press p or q to select the Setup Wizard option, and then press OK.
6. When WLAN Enable ? appears, enable the wireless network.
This will start the wireless setup wizard.
7. The machine will search for your network and display a list of available SSIDs. Press p or q to select the
<New SSID> option, and then press OK.
8. Enter the SSID name, and then press OK.
9. Press p or q to select the Infrastructure option, and then press OK.
10. Press p or q to select the Authentication Method you want, and then press OK.
11. Do one of the following:
• If you selected the Open System option, press p or q to select the Encryption Type None or WEP, and
then press OK.
If you selected the WEP option for Encryption Type, enter the WEP key, and then press OK.
• If you selected the Shared Key option, enter the WEP key, and then press OK.
• If you selected the WPA/WPA2-PSK option, press p or q to select the Encryption Type TKIP+AES or AES,
and then press OK.
Enter the WPA key, and then press OK.
NOTE: Your Dell machine supports the use of the first WEP key only .
12. To apply the settings, select Yes. To cancel, select No.
13. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays Connected. The machine will print
your machine's wireless status report. If the connection fails, check the error code on the printed report.
Open System NONE
WEP
Shared Key WEP
WPA/WPA2-PSK AES
TKIP (TKIP is supported for WPA-PSK only.)
Authentication Method Encryption Mode
WPA2-PSK AES
-
Network Key
12345678
Network 209