Dell E515dw User Manual page 350

WLAN TCP/IP
WLAN
Assistant
Setup
Wizard
WPS/AOSS
WPS w/PIN
Code
WLAN
MAC
Address
Set to
Default
WLAN
Enable
Wi-Fi Direct Push
Button
PIN Code -
Manual
Group
Owner
Device
Info.
Status
Info.
I/F
Enable
350 Machine Settings
Boot Method -
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS Config -
WINS Server Primary
Secondary
DNS Server Primary
Secondary
APIPA -
IPv6 -
- -
- -
- -
- -
Status -
Signal -
SSID -
Comm. Mode -
- -
- -
- -
- -
-
- -
- -
Device Name -
SSID -
IP Address -
Status -
Signal -
- -
Select the BOOT method that best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
(Up to 32 characters)
Select the WINS configuration mode.
Specify the IP address of the primary WINS server.
Specify the IP address of the secondary WINS server.
Specify the IP address of the primary DNS server.
Specify the IP address of the secondary DNS server.
Set the machine to automatically allocate the IP address
from the link-local address range.
Turn the IPv6 protocol on or off.
Configure your wireless network settings using the Dell
CD-ROM.
Configure your wireless network settings manually.
Configure your wireless network settings using the one-
button push method.
Configure your wireless network settings using WPS with
a PIN.
View the current wireless network status.
View the current wireless network signal strength.
View the current SSID.
View the current Communication Mode.
View the MAC address of the machine.
Restore the wireless network setting to the factory setting.
Turn the wireless LAN on or off manually.
Configure your Wi-Fi Direct™ network settings using the
one-button push method.
Configure your Wi-Fi Direct™ network settings using WPS
with a PIN code.
Configure your Wi-Fi Direct™ network settings manually.
Set your machine as the Group Owner.
View the device name of your machine.
View the SSID of the Group Owner.
When the machine is not connected, LCD displays Not
Connected.
View the current IP Address of your machine.
View the current Wi-Fi Direct™ network status.
View the current Wi-Fi Direct™ network signal strength.
When your machine acts as Group Owner, the LCD always
indicate a strong signal.
Turn the Wi-Fi Direct™ connection on or off.