Change The Fax Forwarding Number; Receive Faxes Into Memory When The Paper Tray Is Empty; Dial And Store Fax Numbers; How To Dial - Dell E515dw User Manual

want your fax messages sent, followed by # # (up to 20 digits).
NOTE: You cannot use * and # as dial numbers . However, press # if you want to create a pause .
5. Hang up after you hear your machine beep. Your machine will call the other fax machine which will then print
your fax messages.

Change the Fax Forwarding Number

Related Models:Dell E515dn / Dell E515dw
You can change your fax forwarding number from another touch-tone telephone or fax machine.
1. Dial your fax number.
2. When your machine answers, enter your Remote Access Code (three digits followed by *). If you hear one long
beep, you have messages.
3. When you hear two short beeps, press 9 5 4.
4. Wait for the long beep, enter the new number (up to 20 digits) of the remote fax machine you want your fax
messages forwarded to using the dial pad, then enter # #.
NOTE: You cannot use * and # as dial numbers . However, press # if you want to create a pause .
5. Press 9 0 to stop Remote Access when you have finished.
6. Hang up after you hear your machine beep.

Receive Faxes into Memory When the Paper Tray is Empty

Related Models:Dell E515dn / Dell E515dw
As soon as the paper tray becomes empty during fax reception, the machine begins receiving faxes into the
machine's memory.
Incoming faxes will be stored until the machine's memory becomes full or until paper is loaded in the paper tray.
When the memory is full, the machine will stop automatically answering calls. To print the faxes, load paper in the
tray.

Dial and Store Fax Numbers

• How to Dial

• Voice Operations
• Additional Dialing Operations
• How to Store Numbers
How to Dial
• Dial Manually
• Dial a Number Using One Touch Dial
• Dial a Number Using Speed Dial
• Redial a Fax Number
If you are sending a fax automatically and the line is busy, the machine will redial up to three times at five
Fax 157