My Security Settings Are Not Working Properly - Dell E515dw User Manual

My Security Settings are not Working Properly.

Cause
When using the printing/scanning features,
you did not accept the security alert dialog
box.
The required port number for the security
software setting may be closed.
*1: Windows
®
I Want to Check that My Network Devices are Working Correctly.
Check
Check that your Dell machine, access point/
router, or network hub is turned on.
Check the Link Status in the Network
Configuration Report.
274 Troubleshooting
Action
If you did not accept the security alert dialog box, the
firewall function of your security software may be rejecting
access.
Some security software might block access without showing a
security alert dialog box.
To allow access, see the instructions for your security
software or ask the manufacturer.
The following port numbers are used for Dell network
features:
• Network scanning : Port number 54925 / Protocol UDP
*1
• Network scanning/printing
Protocol UDP
For more information on how to open the port, see
the instructions for the security software or ask the
manufacturer.
Action
Check the following:
• The power cord is connected correctly and the Dell
machine is turned on.
• The access point/router or hub is turned on and its link
button is blinking.
• All protective packaging has been removed from the
machine.
• The toner cartridge and drum unit are installed correctly.
• The front and back covers are fully closed.
• Paper is inserted correctly in the paper tray.
• (For wired networks) A network cable is securely
connected to the Dell machine and to the router or hub.
Print the Network Configuration Report and check that
Ethernet Link Status or Wireless Link Status is Link OK.
: Port number 161 and 137 /
*1
Interface
Wired/Wireless
Wired/Wireless
Interface
Wired/Wireless
Wired/Wireless