Alarm Session; Running An Alarm Session; Acknowledging An Alarm; Figure 6-8 Alarm Session Components - Honeywell Rapid Eye Operator's Manual
Multimedia digital dvr remote view
Hide thumbs
Also See for Rapid Eye:
- Administrator's manual (294 pages) ,
- System administration manual (292 pages) ,
- System administrator manual (264 pages)
Table of Contents
Advertisement
Alarms from Events
Alarm Session
Running an Alarm Session
Acknowledging an Alarm
86
Depending on your selection of alarm handling options, a live alarm session may be
disabled. You can use an alarm session to see the list of alarms and/or acknowledged
alarms at a site. You can run an alarm session even if no alarms are set or ringing. A red
square around a site's connection icon indicates that a site is sending alarms.
Figure 6-8
Alarm Session Components
To view video from the
time of the alarm
1.
Using View, select a site on the Sites list.
2.
Do one of the following:
•
Select the site and click
•
Right-click on the site name and click Alarm on the shortcut menu.
- or -
•
Select the site and click Alarms on the Actions menu.
3.
If a Connections dialog appears, choose the network or dial-up connection and click
OK. An alarm window is displayed in the session pane (see
Connections dialog does not appear if there is only one connection option.
1.
Start an alarm session or switch to one (see
information).
on the toolbar.
Figure
Alarm Session
on page
Alarm
session in
tear-away
window
List of
alarms
6-8). A
86
for more
Advertisement
Table of Contents
Troubleshooting
