While
Working with Connections
1.
Select Use Dial-up Networking.
2.
Leave the Country Code to "(dialing same country)".
3.
Type the unit's Area Code (City Code) and Phone Number.
4.
You have the option of changing "[site name] -> Dialup" by typing in Connection Name. See
figure 3–15.
5.
Click Save and Close. For a report, see
Fig. 3–16. Dial-up Connection.
Note
Area Code: Irregular Use
Fig. 3–17. Irregular Use of Area Codes.
Document 800-02325 Rev A
07/08
(p. 29):
If a prefix number is needed to access an outside line, set the prefix—the extra
telephone keystroke such as a "9" or an "8"—in Microsoft Window's Telephony
program.
Connection
Report, p. 46.
System Administrator Guide
39