Install Sim Card - Honeywell THOR VM2 Reference Manual

Install SIM Card

Equipment Required - User Supplied:
Torquing tool capable of measuring inch pounds
l
#2 Philips screwdriver bit
l
1. For convenience, the Thor VM2 can be removed from the Quick Mount Vehicle Dock, though it is not necessary.
2. Shutdown the Thor VM2 from the Windows menu.
3. Place the Thor VM2 face down on a stable surface.
4. Using a Phillips screwdriver (not supplied) loosen the screws and then remove the tethered access panel with the SIM
label. This panel is on the right hand side when the Thor VM2 is face down with the top away from the user.
5. Locate the SIM card installation slot.
2-35