Honeywell THOR VM2 Reference Manual page 52

6. Position the replacement front panel so wiring connector on the back of the front (B in figure above) panel lines up with
the connector (A in figure above) on the Thor VM2.
7. Gently press the front panel into place.
8. Tighten the twelve (12) captive M3 screws. In the order shown in the top figure above, use a #2 Philips bit and torque the
screws to 6-7 inch pounds.
9. Reinstall the Thor VM2 in the Quick Mount Smart Dock.
10. When the Thor VM2 is placed in the powered dock, the UPS battery automatically reconnects.
11. Restart the Thor VM2.
A. Wiring connector on Thor VM2
body
B. Wiring connector on front panel
2-38