Remap A Key Sequence; Remap A Key To A Sequence Of Unicode Values; Remap A Key To A Special Function - Honeywell THOR VM2 Reference Manual

3. Select Unicode from the Remapped Key pulldown list.
4. There are two Unicode text boxes located on the lower part of this tab. Enter the Unicode value in the left textbox and
the Unicode character is displayed in the right textbox.
5. Click OK to save the result and close the control panel.

Remap a Key Sequence

Up to 16 keys may be specified for the key sequence. The sequence can consist of keys and Unicode values.
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pulldown list.
3. Select Key Sequence from the Remapped Key pulldown list.
4. Select the first key for the multiple key sequence from the pulldown list.
5. Press the Add button to add the key to the multiple key sequence shown in the Key Sequence box.
6. Repeat this steps 4 and 5 until all desired keys have been added to the key sequence. If necessary, use the Clear
button to erase all entries in the Key Sequence box.
7. Click OK to save the result and close the control panel.

Remap a Key to a Sequence of Unicode Values

Up to 16 Unicode values may be specified for the key sequence. The sequence can consist of keys and Unicode values.
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pulldown list.
3. Select Key Sequence from the Remapped Key pulldown list.
4. Select Unicode from the Key Sequence pulldown list.
5. There are two Unicode text boxes located on the lower part of this tab. Enter the Unicode value in the left textbox and
the Unicode character is displayed in the right textbox.
6. Press the Add button to add the key to the multiple key sequence shown in the Key Sequence box.
7. Repeat this steps 4 through 6 until all desired characters have been added to the key sequence. If necessary, use the
Clear button to erase all entries in the Key Sequence box.
8. Click OK to save the result and close the control panel.

Remap a Key to a Special Function

1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pulldown list.
3. Select the special function from the remapped key from the Remapped Key pulldown list. Special functions that can be
assigned are:
Toggle SIP (soft keyboard) state between displayed and hidden
l
Toggle touch screen state between enabled and disabled
l
Toggle integrated keyboard backlight state between on and off
l
Launch the touch screen calibration utility
l
4. Click OK to save the result and close the control panel.
3-37