Off Mode; Power Configuration; Ac/Dc; Ignition Control - Honeywell THOR VM2 Reference Manual

Off Mode

By default, the Thor VM2 turns off if the user presses the power button when the Thor VM2 is On. This behavior can be
configured on the Advanced tab of the Power control panel.
The Thor VM2 is also off when it is not connected to a power source and the UPS battery is depleted. However, an internal
Real Time Clock (RTC) powered by an internal battery maintains the date and time while the Thor VM2 is off.

Power Configuration

Use the Power Schemes tab of the Power control panel to select the desired behavior.

AC/DC

The Thor VM2 is powered on manually. When external power is present, the "Plugged In" power management timeouts are
used.
Ignition Control
The Thor VM2 is configured to power on when the vehicle ignition is switched on. When either Ignition Control - Ignition On
or Ignition Control - Ignition Off is selected and external power is present, the Thor VM2 uses the "Plugged In" power
management settings which correspond to the state of the vehicle ignition.

Auto-On

The Thor VM2 is designed to power on whenever external power is attached. When external power is present, the "Plugged In"
power management timeouts are used.

UPS

The Thor VM2 uses the UPS mode whenever external power is not available. When external power is not present the "Running
on Batteries" power management timeouts from the selected Power Scheme are used.
2-7