Options - Honeywell THOR VM2 Reference Manual

Options

Option
Computer is connectable
Computer is discoverable
Prompt if devices request to
pair
Continuous Search
Filtered Mode
Printer Port - COM9
Logging
Computer Friendly Name
This option is Enabled by default.
Disable this option to inhibit Thor VM2 connection initiated by a Bluetooth scanner.
This option is Disabled by default.
Enable this option to ensure other devices can discover the Thor VM2.
This option is Enabled by default.
A dialog box appears on the Thor VM2 screen notifying the user a Bluetooth device requests to
pair with the Thor VM2.
The requesting Bluetooth device does not need to have been Discovered by the Thor VM2
before the pairing request is received.
Tap the Accept button or the Decline button to remove the dialog box from the screen.
In some cases, if a Bluetooth device is already paired this setting cannot be changed. If this is
the case, an error message is displayed and the option is not changed. The Bluetooth device
must be disconnected before changing this setting.
This option is Disabled by default.
When enabled, the Bluetooth connection never stops searching for a device it has paired with
when the connection is broken (such as the paired device entering Suspend mode, going out of
range or being turned off). When disabled, after being enabled, the Thor VM2 stops searching
after 30 minutes.
This option is Enabled by default.
Determines whether the Bluetooth client discovers and displays all serial Bluetooth devices in
the vicinity (Filtered Mode is disabled/unchecked) or the discovery result displays Bluetooth
scanners and printers only (Filtered Mode is enabled/checked).
When Filtered Mode is disabled, the Thor VM2 can pair with up to four Bluetooth devices.
A Restart is required every time Filtered Mode is toggled on and off.
When in non-filtered mode, the Thor VM2 supports SPP only.
This option is Disabled by default.
This option assigns Bluetooth printer connection to COM9 instead of COM19. To enable this
option, Filtered Mode must be enabled.
This option is Disabled by default.
When logging is enabled, the Thor VM2 creates bt_log.txt and stores it in the C:/Program
Files\LXE\Bluetooth folder. Bluetooth activity logging is added to the text file as activity prog-
resses. A bt_log_bak.txt file contains the data stored by bt_log.txt prior to reboot.
During a reboot process, the Thor VM2 renames bt_log.txt to bt_log_bak.txt. If a file already
exists with that name, the existing file is deleted, the new bt_log_bak.txt file is added and a
new bt_log.txt is created.
Default: Computer description (Control Panel > System > Computer Name tab).
The name, or identifier, entered in this space by the System Administrator is used exclusively
by Bluetooth devices and during Bluetooth communication.
The Computer Description field is blank by default, so unless this field is modified before Blue-
tooth is installed, Computer Friendly Name is also blank, but can be edited by the user.
Information
3-12