Oneclick Internet; Preparing For Initial Use On The Thor Vx; Install Sim Card; Load Firmware - Honeywell Thor VX8 Reference Manual

OneClick Internet

This section contains the User Manual for the customized version of WebToGo's OneClick Internet for the Honeywell Thor
VX8.
OneClick Internet is installed by Honeywell on all Thor VX8s equipped with a WWAN radio. Available carriers and OneClick
features may vary by device.
OneClick Internet provides:
Internet connection management
l
Email download
l
Contact management for SIM and Microsoft Outlook
l
Since WebToGo OneClick Internet is preinstalled, it is present on the Windows Start Menu. A desktop icon is also provided.
Honeywell does not recommend using standby on the Thor VX8 while the WWAN connection is active. When exit-
ing standby, a delay of one minute or more may occur as the WWAN radio reads firmware files and initializes
before reconnecting. If this delay is acceptable to the user, standby may be enabled.

Preparing for Initial Use on the Thor VX8

Install SIM Card

If using a CDMA carrier such as Verizon, skip this step because a SIM card is not used.
Install a SIM card in the Thor VX8.

Load Firmware

While the OneClick Internet utility is preinstalled, it is necessary to load the GOBI radio firmware for your selected carrier such
as AT&T, T-Mobile or Verizon.
Note: The firmware may automatically be selected when a SIM card is installed in the Thor VX8.
Double-tap the OneClick Internet icon on the Thor VX8 desktop.
Tap the Settings button and select the Firmware tab. Select the firmware for your carrier from the list and tap Change.
For more details, see OneClick Internet Connection Manager
Activation
This step is only necessary for Verizon.
The activation screen is displayed automatically after the Verizon firmware is selected. If the activation screen is not
automatically displayed, double-tap the OneClick Internet icon on the desktop. Select Settings > General tab and tap the
Activate button.
and the Firmware tab.
4-101