Setting The Cassette - Canon iR5000i Service Manual

2.11 Setting the Cassette

Step
1 Push the cassette releasing button, and slide
out each cassette to the front; then remove
the packing materials.
2 Set the side plate[1] of each cassette to the
hole identified by the marking M[2] (A4/
A3).
3 Fit the Inch-preventing roll that comes with
the machine from inside the cassette so that it
covers the hole (STMT-R) identified by the
marking A[3] and the one (LTR-R) identified
by the marking H[4].
• Be sure there is no gap.
• Perform this step only when the
use of Inch-configured paper is
not planned.
4 Set the cassettes to the appropriate sizes to
suit the user's needs and attach the sticker
indicating the new sizes.
5 Slide the cassettes into the machine.
COPYRIGHT © 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 3 INSTALLATION
Checks/remarks
[1]
[2]
[4]
[3]
3-21 S