Feeding Assembly; Removing The Feeding Belt - Canon iR5000i Service Manual

Hide thumbs Also See for iR5000i:

Table of Contents

CHAPTER 5 PICK UP/FEEDING SYSTEM

9.5 Feeding Assembly

1) Slide the fixing/feeding unit from the

2) Remove the fixing front cover, feeding

right cover, and feeing left cover.

3) Disconnect the two connectors [1], and

remove the screw [2]; then, detach the

harness guide [3].

4) Remove the two mounting screws [4],

and detach the fixing/feeding unit re-

leasing lever support [5].

5) Remove the E-ring [6], bearing [7], and

two screws [8] from the front.

6) Remove the E-ring [9], pulley [10], pin

[11], three screws [12], E-ring [13], and

bearing [14]; then, detach the feeding

belt unit [15].

2000 2000 2000 2000

CANON iR5000i/iR6000i REV.0 JUNE 2001

Table of Contents

Ir6000i Image reader-a1