5.4.8 Power Supply PCB
1) Remove the left lower cover.
(When doing so, be sure to slide out the
right deck and the cassettes in advance.)
2) Remove the seven screws [1], and de-
tach the shielding plate [2].
3) Remove the 11 screws [3], and detach
the power supply cover [4].
4) Disconnect the 15 connectors, and re-
move the two screws [5]; then, detach
the power supply PCB [6].
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 7 EXTERNALS AND CONTROLS
[1]
F07-504-14
F07-504-15
F07-504-16
[1]
[2]
[3]
[3]
[4]
[3]
[5]
[6]
7-29 P