Transfer/Separation Charging Assembly; Removing The Transfer/Separation Charging Assembly - Canon iR5000i Service Manual

7.7 Transfer/Separation Charging Assembly

7.7.1 Removing the Transfer/Separation Charging Assembly

1) Open the front cover, and slide out the
fixing/feeding unit.
2) Remove the two removing screws [1],
and detach the feeder right front cover
[2].
3) Remove the mounting screw [3], and
detach the fixing guide [4].
4) Disconnect the connector [5], and slide
out the transfer/separation charging as-
sembly [6] to the front; then, detach it
by pulling it up at an angle.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 4 IMAGE FORMATION SYSTEM
[1]
[2]
F04-707-01
F04-707-02
F04-707-03
[1]
[3]
[4]
[6]
[5]
4-63 P