Solenoid; Right Deck Pickup Roller Releasing Solenoid (Sl6); Adjusting The Position Of The Right Deck Pickup Solenoid (Sl6) - Canon iR5000i Service Manual

5.8 Solenoid

5.8.1 Right Deck Pickup Roller Releasing Solenoid (SL6)

1) Remove the left deck drive assembly.
2) Remove the waste toner bottle holder.
3) Remove the three screws [1], and detach
the cable support base [2].
4) Remove the two screws [3], and detach
the right deck pickup roller releasing
solenoid [4].

5.8.2 Adjusting the Position of the Right Deck Pickup Solenoid (SL6)

Adjust the position of the solenoid so that
the left edge of the arm 2 is 57.2 ± 0.5 mm
from the center of the hole A in the solenoid
mounting base.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 7 EXTERNALS AND CONTROLS
F07-508-01
F07-508-02
F07-508-03
[1]
[2]
[4]
[3]
[A]
±
57.2 0.5mm
7-47 P