Mounting The Original Holder - Canon iR5000i Service Manual

CHAPTER 3 INSTALLATION

5. Mounting the Original Holder

Step
1 Mount the original holder [2] to the
machine (right) using the two
stepped screws [1] that come with the
machine.
If the original holder is not needed,
fit the two rubber caps that come
with the machine instead.
If it is difficult to mount the original
holder, try loosening the two mount-
ing screws.
3-32 S
Work
COPYRIGHT © 2001 CANON INC.
Checks/remarks
[1]
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
[2]