Removing The Inverter Pcb - Canon iR5000i Service Manual

8.2 Removing the Inverter PCB

1) Remove the right upper cover and the
right upper cover base.
2) Remove the reader controller PCB.
3) Remove the three screws [1], and de-
tach the blanking plate [2].
4) Disconnect the two connectors[4] from
the inverter PCB [3].
5) Remove the two screws [5], and pull
out the inverter unit [6].
COPYRIGHT © 2001 CANON INC.
CHAPTER 2 ORIGINAL EXPOSURE SYSTEM
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
[1]
F02-802-01
[3] [4]
[4]
F02-802-02
[6]
F02-802-03
[2]
[1]
[5]
2-29 R