Cisco 6260 System Overview
•
Contains the ATM switch fabric
Provides CO facility alarm relay contact interfaces and an ACO button
•
Provides visual and audible operating status alerts
•
Is manageable through Cisco IOS software or CDM
•
Provides Cisco IOS-based ATM QoS
•
Controls timing and redundancy
•
Note
Supports the aggregation of up to 12 subtended node chassis configured for OC-3c operation in a
•
daisy chain configuration.
Provides an OC-3c subtend interface through optical connectors located on the NI-2 card faceplate.
•
For hardware specifications for the OC-3c/OC-3c NI-2 card, see the
Note
on page
Cisco 6260 Hardware Installation Guide
1-36
The BITS interface is connected through the OC-3c I/O module located on the front of the Cisco
6260 chassis.
A-10.
Chapter 1
Product Overview
"OC-3c/OC-3c NI-2 Card" section
OL-2365-02