Octal-Port G.shdsl Shtu-C Line Card Overview - Cisco 6260 Installation Manual

Chapter 1 Product Overview
Table 1-8
LED
ATU-C 2
ATU-C 3
ATU-C 4
ATU-C 5
ATU-C 6
ATU-C 7
ATU-C 8

1.2.3.7 Octal-Port G.SHDSL SHTU-C Line Card Overview

The octal-port G.SHDSL SHTU-C line card (8xG.SHDSL)
•
•
•
•
•
For hardware specifications for the 8xG.SHDSL line card, see the
Note
Card" section on page
OL-2365-02
8xDMT over ISDN LED Indicators (continued)
State
Green solid
Green blinking
Off
Green solid
Green blinking
Off
Green solid
Green blinking
Off
Green solid
Green blinking
Off
Green solid
Green blinking
Off
Green solid
Green blinking
Off
Green solid
Green blinking
Off
Supports eight SHDSL modem connections
Supports trellis coded pulse amplitude modulation (TC-PAM) line encoding
Converts G.SHDSL modulation from the line into digital data streams to and from the NI-2 card
Supports fixed and adaptive rate modes
Has deployment guidelines when used in the Cisco 6260 system; see the
8xG.SHDSLs—Cisco IOS Release 12.2(7)DA and Later" section on page
A-7.
Function
Modem 2 is trained.
Training is in progress for modem 2.
Modem 2 is idle.
Modem 3 is trained.
Training is in progress for modem 3.
Modem 3 is idle.
Modem 4 is trained.
Training is in progress for modem 4.
Modem 4 is idle.
Modem 5 is trained.
Training is in progress for modem 5.
Modem 5 is idle.
Modem 6 is trained.
Training is in progress for modem 6.
Modem 6 is idle.
Modem 7 is trained.
Training is in progress for modem 7.
Modem 7 is idle.
Modem 8 is trained.
Training is in progress for modem 8.
Modem 8 is idle.
Cisco 6260 Hardware Installation Guide
Cisco 6260 System Overview
"Guidelines for Intermixing
1-28.
"Octal-Port G.SHDSL SHTU-C Line
1-25