Ethernet Port; Card Management Ethernet Connector; Table; Pin Assignments For The Ni-2 Card Management Ethernet Connector - Cisco 6260 Installation Manual

Appendix C Connector and Pinout Specifications
C.5 Ethernet Port
The Ethernet port, a 10BaseT interface with an RJ-48 receptacle connector, is on the NI-2 card faceplate.
It is used to connect the Cisco 6260 to the management station, a Sun SPARCstation running Cisco DSL
Manager (CDM) software.
Ethernet connector.
Table C-3
Pin
Number
1
2
3
4
5
6
7
8
Figure C-6
Pin 1
Pin 8
OL-2365-02
Table C-3 shows the pin assignments, and

Pin Assignments for the NI-2 Card Management Ethernet Connector

Signal
TX+
TX–
RX+
Unused
Unused
RX–
Unused
Unused
NI-2 Card Management Ethernet Connector
RJ-45 female
Figure C-6 shows an NI-2 card
Cisco 6260 Hardware Installation Guide

Ethernet Port

C-5