Table of Contents
Advertisement
Appendix A
Technical Specifications
A.1.7 Octal-Port DMT ATU-C Over ISDN Line Card
Table A-7
Table A-7
Specification
Standards supported
External interfaces
Data rates (per port)
Framing modes
Internal hardware
Dimensions
Weight
Power consumption
Minimum software and network
management requirement
A.1.8 Octal-Port G.SHDSL SHTU-C Line Card
Table A-8
Table A-8
Specification
Standards supported
Power consumption
OL-2365-02
lists the specifications for the 8xDMT over ISDN.
Octal-Port DMT ATU-C Over ISDN Line Card Specifications
Description
•
•
•
•
•
8 (no connectors on card)
Upstream: Up to 1024 kbps
Downstream: Up to 7.616 Mbps
Overhead Framing Mode 3 supported
•
•
•
•
Height: 6.07 in. (15.42 cm)
Depth: 8.62 in. (21.89 cm)
Width: 0.88 in. (2.24 cm)
0.875 lb (0.4 kg)
24W
Cisco IOS—Release 12.2(5) DA
lists the specifications for the 8xG.SHDSL.
Octal-port G.SHDSL SHTU-C Line Card Specifications
Universal Test & Operations PHY for ATM, Level 2; a
standard for transport of ATM cells over a 16-bit
parallel data bus. Refer to the ATM Forum document
af-phy-0039.000.
ITU G.992.1 (G.dmt), Annex B/ETSI
ITU G.994.1 (G.hs)
ETSI TS 101 388 V.1.1.1/(draft) TM6(98)12
TS102 080 v1.3.2 -Support for 2B1Q and 4B3T ISDN
40 MHz Motorola MPC850 microprocessor
8 MB SDRAM
8 Mb boot flash
1 KB serial EEPROM
Description
TC-PAM without OPTIS
ETSI SDSL, TM6(00)10
11.3W at 136 kbps
15.0W at 1.554 Mbps
16.5W at 2.312 Mbps
Cisco 6260 Hardware Installation Guide
Hardware Specifications
A-7
Advertisement
Table of Contents
