Table of Contents
Advertisement
Chapter 1
Product Overview
Table 1-2
Card Slot
1 to 9
10
11
12 to 32
1. 4xSDSLs and G.SHDSLs can be used only in a Cisco 6260 system without a POTS
splitter configuration.
2. 8xDMT over ISDN can be used only in a Cisco 6260 system with a POTS splitter configuration.
You can purchase blank faceplates for empty Cisco 6260 card slots.
Note
Figure 1-6
chassis. In this guide, the slot numbers are shown on the cards for easy reference and readability. These
slots are referred to in subsequent sections of this chapter and elsewhere in this guide.
OL-2365-02
Cisco 6260 Card Slot Assignments
Card Assignment
4xDMT, 4xDMT over ISDN, 4xflexi, 4xSDSL
8xDMT over ISDN
NI-2 card
Secondary (redundant) NI-2 card
4xDMT, 4xDMT over ISDN, 4xflexi, 4xSDSL, 8xDMT, 8xDMT
over ISDN, or 8xG.SHDSL
identifies the Cisco 6260 card slots. Each slot on a chassis is numbered along the top of the
2
1
, or 8xG.SHDSL
Cisco 6260 Hardware Installation Guide
Cisco 6260 System Overview
1
, 8xDMT,
1-11
Advertisement
Table of Contents
