Search Report; Report Options; Figure 5-7 Motion Search Report - Honeywell Rapid Eye Operator's Manual

Searching for Motion

Search Report

Report Options

66
After preparing a motion search (see
optional motion options, click Search. A motion search report
Figure 5-7 Motion Search Report
Magnitudes of the
detected motion.
Results can be filtered
by magnitude.
Magnitudes Filter (Filter Mag.)
In Figure 5-7, you can see that the leftmost column of a report shows the magnitude, or how
strongly a video image has changed. Low magnitudes of 10% to 20% indicate that gradual
changes in lighting or slow movement are being detected. Higher magnitudes (70% or
more) usually mean quick motion or sudden, dramatic changes in lighting.
Customizing the Range of Magnitudes Reported
1. After obtaining a motion search report, click in the magnitude filter's Filter Mag From
or To fields, as needed.
2. Adjust the value by either:
• Entering a value with the keyboard.
• Clicking on the arrows at the right-hand side of the box.
Preparing a Motion Search
(Figure
Results, the number of times
that motion was found.
The list can
be saved
on page 62), and using the
5-7) is produced.
Right-click the bar
display to filter the
bars by a different
criteria (Percent is
the default).