Opting for Many Cameras in a Retrieval Session
Viewing Video in a Retrieval Session
Item box
Returning to a Motion Session from a Retrieval Session
Document 800-02951V3 Rev A
11/09
To view video from many cameras, at the time that the motion was detected, a Retrieval
session can be started from a Motion Search session.
1.
Select one or many items in the Motion Search report.
2.
Click Retrieval. A Retrieval session starts, starting at the time that the selected item's
motion was detected. Select the cameras to view. A box is added, showing that a
Motion event is being shown. When many items are selected, they are listed in that
Retrieval session's item box (see
Figure 5-13
Item Box Shown when Retrieval Starts from a Motion Session
The Motion Search report is still available in the Motion session, if you need video from
motion that occurred at other times.
1.
Either:
•
Select the Motion heading on the site tree.
•
Drag the Retrieval session aside. If the tear-away player is maximized, resize the
Retrieval session before dragging it aside.
•
Close the Retrieval session.
2.
In the Search for Motion window, either:
•
Double-click a list item. The video excerpt plays in the working frame of the
Search for Motion window (see
•
Select one or many items, then click Retrieval. A Retrieval session starts, using
all cameras and starting at the time of the first of the selected items.
Rapid Eye Remote View Operator Guide
Figure
5-13).
Figure 5-7
on
page
66).
71